Search found 19 matches
- Wed Apr 11, 2018 10:57 pm
- Forum: Support
- Topic: Non-standard parallel port address
- Replies: 39
- Views: 130828
Re: Non-standard parallel port address
I used the original amp in my setup - I just soldered a jumper from the 78L05 on-board regulator output to the #mute line on the prism card connector and soldered an 3.5mm patch cable to the unpopulated RCA jack pads. I saw a post where someone else soldered an RC network between the molex 5V line a...
- Sun Apr 08, 2018 9:03 pm
- Forum: Support
- Topic: Non-standard parallel port address
- Replies: 39
- Views: 130828
Re: Non-standard parallel port address
Getting nucore to start on boot is pretty simple: You can skip step 1 if the nucore menu can "see" your power driver board without using the "-parallel" commandline option ie. if you can accept or decline the the license agreement with the buttons without the "-parallel"...
- Thu Apr 05, 2018 9:53 pm
- Forum: Support
- Topic: Non-standard parallel port address
- Replies: 39
- Views: 130828
Re: Non-standard parallel port address
Your best bet would be to start from scratch again but use the "bigger hammer" instructions for libstdc++5 (do this last). I think you were about done before you started from scratch and just needed to install the roms.
- Thu Apr 05, 2018 7:39 pm
- Forum: Support
- Topic: Non-standard parallel port address
- Replies: 39
- Views: 130828
Re: Non-standard parallel port address
I guess the X server is angry about something. Doesn't matter as you don't need it for Nucore. I would need a little more of the error output to know exactly whats going on. Pull up a terminal (ctrl+alt+f7 if all else fails) and try to start Nucore manually: cd /root/nucore/bin ./run nucore You shou...
- Wed Apr 04, 2018 8:25 pm
- Forum: Support
- Topic: Non-standard parallel port address
- Replies: 39
- Views: 130828
Re: Non-standard parallel port address
Yeah, looks like you've got everything you need now except for the libstdc++5 package. Here's a hacky way to force install it. dpkg --force-all -i libstdc++5_3.3.6-15ubuntu6_i386.deb That should do it. You should be able to start nucore now. If that fails - use a bigger hammer: extract the .deb pack...
- Tue Apr 03, 2018 8:02 pm
- Forum: Support
- Topic: Non-standard parallel port address
- Replies: 39
- Views: 130828
Re: Non-standard parallel port address
Odd. Lets do some cleanup and try to continue. Looks like 'process' saw a failure when the package was indeed installed. sudo apt-get clean sudo apt-get -f install sudo dpkg --configure -a I think the required packages were installed with the possible exception of libstdc++5 but we can forcibly inst...
- Mon Apr 02, 2018 10:23 pm
- Forum: Support
- Topic: Non-standard parallel port address
- Replies: 39
- Views: 130828
Re: Non-standard parallel port address
Try just running this and let me know what it reports back:
apt-get install libsdl-image1.2
apt-get install libsdl-image1.2
- Sun Apr 01, 2018 8:10 pm
- Forum: Support
- Topic: Non-standard parallel port address
- Replies: 39
- Views: 130828
Re: Non-standard parallel port address
I intended for them to be used on 8.04 but it doesnt really matter as long as you arent on an Ubuntu release after ~17.04 (would just set a bunch of invalid sources).
- Sun Apr 01, 2018 6:36 pm
- Forum: Support
- Topic: Non-standard parallel port address
- Replies: 39
- Views: 130828
Re: Non-standard parallel port address
Make sure you're connected to the internet and run this: sudo sed -i -re 's/([a-z]{2}\.)?archive.ubuntu.com|security.ubuntu.com/old-releases.ubuntu.com/g' /etc/apt/sources.list then run: sudo apt-get update Rerun the nucore install. It should complete now after grabbing a bunch of stuff. You'll prob...
- Tue Mar 27, 2018 4:09 am
- Forum: Support
- Topic: Non-standard parallel port address
- Replies: 39
- Views: 130828
Re: Non-standard parallel port address
I use 10.04 but only because I was having issues with 17.10 on my machine and I already had 10.04 downloaded.
- Mon Mar 26, 2018 8:41 pm
- Forum: Announcements
- Topic: Nucore 2.25.3R Released
- Replies: 14
- Views: 105324
Re: Nucore 2.25.3R Released
That fixed it! Thanks Chuck!
Best,
J
Best,
J
- Mon Mar 26, 2018 3:23 am
- Forum: Announcements
- Topic: Nucore 2.25.3R Released
- Replies: 14
- Views: 105324
Re: Nucore 2.25.3R Released
Hi Chuck, I did some testing and found that when using a non-standard parallel port address (in my case 0x3008) I cannot access the jukebox or the nucore menu. All other functions work perfectly ie. gameplay, coin door buttons, etc. I thought this might be an issue with my install so I freshly insta...
- Sun Mar 25, 2018 9:32 pm
- Forum: Support
- Topic: Non-standard parallel port address
- Replies: 39
- Views: 130828
Re: Non-standard parallel port address
I take no responsibility for anything that might go awry when doing this. You will need to run as root and that can be dangerous if you aren't familiar with the risks involved. That being said - this should do what you need. I don't have the machine in front of me. So, this is off the top of my head...
- Sun Mar 25, 2018 9:05 pm
- Forum: Support
- Topic: Non-standard parallel port address
- Replies: 39
- Views: 130828
Re: Non-standard parallel port address
You can run/install the nucore updates manually with a bit of linux-fu.
- Tue Feb 20, 2018 5:55 am
- Forum: Wizard Blocks
- Topic: Pinball 2000 Wizard Blocks running on Nucore
- Replies: 5
- Views: 139933
Re: Pinball 2000 Wizard Blocks running on Nucore
Hey, That is really cool. I think many people would be interested but parts of this forum have stagnated over the years. Most likely not many people have seen this. It should come around in the near future since the developers are releasing new versions again. As for the sounds - I believe the devel...