Bill Ung Saucer kit Follow up. I contacted Bill Ung and asked if his Mod will work with the Nucore system and he said that there should be no problems at all seeing that the system does NOT connect to the Motherboard only the driver board. The Mod's PC board only PLUGS into the available slot on the...

Followup for those that may need to remove there coin mechs from the Coin door. There are NO pins that need to be removed. Directly facing the coin mech in the door. There is a plastic latch that looks like an inverted T Carefully pull back the latch by the Horizontal ends of the T it may take a bit...

Just a followup in case someone else comes across this problem. I dove into the machine one more time searching for a switch that may be activated by the Diverter paddle but could find none nor was there one listed in the manual for the Lock Diverter. One thing that was out of place by the diverter ...

Everything seems to be moving along.

Hope I can make it to the show.

Ever consider using a MAC for the core would it be possible?

After my last game I always run a test and the Test said that the Lock Diverter was stuck in the closed position! When seeing this result I realized that in the last few games the balls never came down the rightside ramp. Inspecting the diverter assembly sure enough the paddle was stuck against the ...

Welcome back! Glad you had fun, NOW GET BACK TO WORK on NUCORE!!!!!!!!! Just kidding.

I found this video that someone in France put together. Thought you guys might like.

http://www.dailymotion.com/video/x5jg2w ... videogames

Wow That expo looks like its going to be great !

Nucore guys and George Gomez will be speaking very, very Cool.

"make the Emulator much better in a number of ways"

You guys Rule!!!!!!!!!!

This news SOUNDS good!

LOL, Yes Im talking about the Translight reflection not the light bulb bleeding. I notice however that If I squat down about 6" then it disappears all together. I guess the viewer/players height makes a difference! Im 5'11" I see a reflection right across the middle of the playfield and I ...

THX for the tip! Did you have any troubles installing it in your RFM?

Did you notice the glare?

Could you take vids and post on Youtube for those that cant attened?

While working on my playfield I placed a towel over the backglass to avoid getting it scratched with the field leaning against it. When I was done with the work and was testing the game I noticed that the field was much easier to see because the Backglass reflection was gone! The light was covered w...