iT GETS TO nUCORE lAUNCHER V1.0
Watchdog Init
Nucore USB update running
Checking for File Updates
Done
then sits there....or
it GETS TO 29.813489 HDACODEC: uNKNOWN MODEL THEN runs through to the above and shuts down and starts all over again in an endless loop

Or it gets to USB FTDI serial converters Drive
(I hear the speakers kick on but then it just sits there, for five minutes, then it goes through the above to the Nucore Launcher and goes through to a blank screen...


Or
It gets to 53.206737 Kernel Panic not syncing: Fatal exception interrupt

Have not done anything to make any changes and this happened all on its own..This PC is not connected to the internet, should it be?

Please email your log files.

Get a blank, formatted USB thumb drive.
From our setup menu select update and follow the instructions. The update copies the log files to the USB drive. Zip the log files and email them to info(at)bigguyspinball.com

I can not get to setup menu....Do you have a suggestion so I can get to that?
Thanks

digger47 wrote:I can not get to setup menu....Do you have a suggestion so I can get to that?
Thanks

Good point. Do you know your way around Linux? If so the log files are in /root/nucore/logs I believe

I just emailed you my phone number. Please call me.

Chuck, thanks for all your help and on a Sunday no less ( I hope you are getting double time
It now looks to be a computer problem, my fault ( how could I doubt your product )
digger and sue

digger47 wrote:Chuck, thanks for all your help and on a Sunday no less ( I hope you are getting double time
It now looks to be a computer problem, my fault ( how could I doubt your product )
digger and sue

glad to help. Is it fixed?

all is good now.....guess what it was....bios...amd machine..cool and quiet was enabled....I have no idea how it got changed to that but now all that works now the last thing is to auto start when we turn the power on instead of having to turn the computer button ON....dont know how that got changed either....

Thanks


Sue

Okay I figured out that the CMOS battery was dead, replaced it and whala the cmos settings no longer go back to default.....
WHEW so all in all your program works WONDERFUL it was the equipment....THANK YOU for all your help.

The learning process continues........Byrdie Sue and Digger47