Page 1 of 1

Launcher Hardware Error

Posted: Thu Apr 14, 2011 9:27 am
by wolfsoft
Hi to this great Forum.
I bought the RFM 2 month ago and it works great with the nurcore system.
But today I startet it and it was hanging here:
I did'nt install the nucore and have no expierience with it.

I hope you have hints for me, I am good in computer work and please help me out of this desaster...

Image

Re: Launcer[6] Hardware Error

Posted: Thu Apr 14, 2011 10:01 am
by wolfsoft
I opened the backbox and reconnected all connectors at the pc.
startup again and its working again...
what was going wrong?
Thanks
Klaus

Re: Launcer[6] Hardware Error

Posted: Thu Apr 14, 2011 10:41 am
by Chuck
That error meant the usb board was not connected

Re: Launcer[6] Hardware Error

Posted: Thu Apr 14, 2011 10:44 am
by wolfsoft
thanks for the info :-)
Its working again *puhh*

Re: Launcer[6] Hardware Error

Posted: Thu Apr 14, 2011 11:59 am
by wolfsoft
to the admins. I wrote launcher wrong in the subject. Please change it to the correct form!
thanks

Re: Launcer[6] Hardware Error

Posted: Sat Apr 07, 2018 3:21 am
by Jawzzz
I ran into the same issue. I picked up an RFM recently which had a Nucore system already installed. The machine was running fine for a week, but last night, the system failed to boot up and stopped at the same point as in the OP screenshot. Based on the threads, I focused on the USB -> board coonector. After unplugging/plugging both ends several times, no change. I then swapped to a different USB port on the back of the machine and bingo! Back in business. 5 for 5 reboots so far

My only advice as previously suggested, if there's a way to fix the typo in the subject it would have been a tad easier to find on the forums.

Re: Launcher Hardware Error

Posted: Sat Apr 07, 2018 10:53 am
by Chuck
Done