Mystery Monday Post

Post Reply
applejuice
member
Posts: 49
Joined: Thu Mar 20, 2008 10:03 am
Location: UK
Contact:

Mystery Monday Post

Post by applejuice » Mon Mar 29, 2010 4:24 pm

Bonus Points for working out how i got my stock game to do this (Chuck you are not allowed to answer!)
IMG_3103.jpg
IMG_3103.jpg (74.23 KiB) Viewed 3710 times
Jim

http://tournament.mypinballs.com

"All parts should go together without forcing. Remember the parts you are reassembling were disassembled by you. If you can’t get them together again, there must be a reason. Do not use a hammer." ~ IBM

doctorquest
member
Posts: 5
Joined: Tue Feb 23, 2010 9:56 am

Re: Mystery Monday Post

Post by doctorquest » Tue May 04, 2010 8:02 pm

I give up.
How do I get my machine to do this?

applejuice
member
Posts: 49
Joined: Thu Mar 20, 2008 10:03 am
Location: UK
Contact:

Re: Mystery Monday Post

Post by applejuice » Wed May 05, 2010 2:26 pm

Time to come clean. This is achieved once you have network access to your game. There are some telnet commands built into the stock rfm code that enable various things. One of these is a scene manager that allows you to start the game from any mode, hence the screen shot I attached. I'm sure we can all have some remote fun with these things once the networking is added.

It is interesting to note that the graphics for the green selections are built in which kind of suggests williams were going to allow this starting point before changing their minds.
Jim

http://tournament.mypinballs.com

"All parts should go together without forcing. Remember the parts you are reassembling were disassembled by you. If you can’t get them together again, there must be a reason. Do not use a hammer." ~ IBM

Post Reply