Bill Ung UFO kit

Support questions and answer and latest software.
Post Reply
Troz
member
Posts: 40
Joined: Thu Apr 03, 2008 3:43 pm

Bill Ung UFO kit

Post by Troz »

I just finished shopping out my RFM, which also involved installing Bill Ung's UFO light kit. There is a problem, but I don't know if it lies with the kit or with Nucore so I'm posting here and emailing Bill for advise. Does anyone else have the kit installed in their Nucore system? The issue mine has is that Bill's board never completes the boot sequence. According to his instructions, LED #3 on his board should be lit until the RFM boot sequence is complete, at which point the LED will go out. My LED #3 is always on. The UFO lights do light up, but the various sequences never start.

-Karl
User avatar
Chuck
Site Admin
Posts: 1546
Joined: Wed Mar 28, 2007 3:34 pm
Location: Michigan
Contact:

Re: Bill Ung UFO kit

Post by Chuck »

Let me know what bill says. I'm not sure how his mod works exactly but we talked to him and he said there should be no problem.
Troz
member
Posts: 40
Joined: Thu Apr 03, 2008 3:43 pm

Re: Bill Ung UFO kit

Post by Troz »

Bill is quick! He suggested checking the flashbulb under the red arrow beneath the jump ramp, as LED #3 is dependent upon that bulb. Swapped it out and everything works as it should.
Post Reply