Followed your instructions for the amp - no sound at all. Checked all connections, then plugged in pc speakers to make sure it wasn't the motherboard, but they work fine. Master volume is at max. Connections were - power, mic to pc, and speaker connector. Can't think of anything else - just dead as a doornail.
Scott
Nucore Amp not working
Re: Nucore Amp not working
Scott are you trying to make the original amp work or the new big guys amp?
If you are trying to get the original amp to work follow my instructions:
viewtopic.php?f=15&t=907
If you are trying to get the original amp to work follow my instructions:
viewtopic.php?f=15&t=907
-
- member
- Posts: 7
- Joined: Mon Oct 25, 2010 8:39 pm
Re: Nucore Amp not working
Yours - I decided to not modify the original
-
- member
- Posts: 7
- Joined: Mon Oct 25, 2010 8:39 pm
Re: Nucore Amp not working
Oops - I meant theirs...
Re: Nucore Amp not working
Scott,
Is the audio amp LED lit? If it's not you're not getting power. A few things to check:
The cable into the audio jack - it's kind of a tight fit. Make sure it is pushed in all the way. Cable from amp to computer - It should be plugged into the green audio socket.
Power connector to audio amp - Same issue, tight fit. Make sure it's pushed in all the way.
Power brick - Make sure the cord is plugged securely into the brick.
If you try all this and it's still not working give me a call. 269.808.0596
Is the audio amp LED lit? If it's not you're not getting power. A few things to check:
The cable into the audio jack - it's kind of a tight fit. Make sure it is pushed in all the way. Cable from amp to computer - It should be plugged into the green audio socket.
Power connector to audio amp - Same issue, tight fit. Make sure it's pushed in all the way.
Power brick - Make sure the cord is plugged securely into the brick.
If you try all this and it's still not working give me a call. 269.808.0596