Several issues (update NuCore and light error messages

Support questions and answer and latest software.
Post Reply
knapejor
member
Posts: 39
Joined: Wed Nov 11, 2009 11:08 am

Several issues (update NuCore and light error messages

Post by knapejor »

Hi,

I've had some trouble since the beginning of my NuCore installation. Now updating to 2.0 I saw them again,
and would like some advice:

1. I installed the update, and the program updated well, but next to this my loading screen picture did not change, I don't have information from the servers.txt in my NuCore settings, and I might miss more?

2. My machine keeps telling me (since NuCore is installed in the machine) that I have light (lamp) problems, the number of errors is not consistent. The lights are working fine though, really strange. (See attached pictures)

Hopefully someone can help me out on this.

Regards,
Jord Knapen
Attachments
1.JPG
1.JPG (164.24 KiB) Viewed 31980 times
2.JPG
2.JPG (249.87 KiB) Viewed 31981 times
3.JPG
3.JPG (204.74 KiB) Viewed 31982 times
ErikvS
member
Posts: 26
Joined: Wed Oct 13, 2010 3:14 pm

Re: Several issues (update NuCore and light error messages

Post by ErikvS »

you need to do the 2.0 update twice.
The first run is to get 2.0 on your system
the second is to import the servers.txt and the new loading screen :)
knapejor
member
Posts: 39
Joined: Wed Nov 11, 2009 11:08 am

Re: Several issues (update NuCore and light error messages

Post by knapejor »

I just read that in the installation PDF, will try it asap thanks. Any ideas on the light errors?
User avatar
Chuck
Site Admin
Posts: 1546
Joined: Wed Mar 28, 2007 3:34 pm
Location: Michigan
Contact:

Re: Several issues (update NuCore and light error messages

Post by Chuck »

knapejor wrote:I just read that in the installation PDF, will try it asap thanks. Any ideas on the light errors?
Have you tried swapping driver boards? I think we went through this once before and the only thing you hadn't tried was the driver board.
knapejor
member
Posts: 39
Joined: Wed Nov 11, 2009 11:08 am

Re: Several issues (update NuCore and light error messages

Post by knapejor »

I'm not able to swap those boards as I only have one :( The update worked perfectly after the second time (of course :))
knapejor
member
Posts: 39
Joined: Wed Nov 11, 2009 11:08 am

Re: Several issues (update NuCore and light error messages

Post by knapejor »

Chuck, as I bought the machine from someone some time ago, and I'm not sure if there might be led's in it, can it be that this causes these 'problems'?

Another question: On the first picture you can see that the date (year) is not quite right, after changing it, it resets to
the future again. Does the date come from the BIOS or OS?
User avatar
Chuck
Site Admin
Posts: 1546
Joined: Wed Mar 28, 2007 3:34 pm
Location: Michigan
Contact:

Re: Several issues (update NuCore and light error messages

Post by Chuck »

If there are LEDs in it that would definitely cause those problems. The date issue is with the pin2k source code. It doesn't hurt anything.
knapejor
member
Posts: 39
Joined: Wed Nov 11, 2009 11:08 am

Re: Several issues (update NuCore and light error messages

Post by knapejor »

Ok thanks again for your quick reply Chuck, I will try to alter the leds.cfg as to ignore the lights. Will keep you posted.
knapejor
member
Posts: 39
Joined: Wed Nov 11, 2009 11:08 am

Re: Several issues (update NuCore and light error messages

Post by knapejor »

All errors are gone now :)
extra ball
member
Posts: 1
Joined: Wed Feb 22, 2012 4:51 am

Re: Several issues (update NuCore and light error messages

Post by extra ball »

this maybe my first post, BTW loving my RFM on nucore, and have updated to 2.0 tourny mode. I installed leds earlier this week, and now have a ton of lamp errors. Does this mean that I need to manually change a config file? If so, it hardly seems worth the bother.
Cheers
User avatar
Chuck
Site Admin
Posts: 1546
Joined: Wed Mar 28, 2007 3:34 pm
Location: Michigan
Contact:

Re: Several issues (update NuCore and light error messages

Post by Chuck »

extra ball wrote:this maybe my first post, BTW loving my RFM on nucore, and have updated to 2.0 tourny mode. I installed leds earlier this week, and now have a ton of lamp errors. Does this mean that I need to manually change a config file? If so, it hardly seems worth the bother.
Cheers
Glad to hear you're loving it. To make the LED errors go away you do need to modify the config file (a feature btw.) If it doesn't bother you no biggie. It won't hurt anything.
nmeun87007
member
Posts: 5
Joined: Mon May 07, 2012 12:49 pm

Re: Several issues (update NuCore and light error messages

Post by nmeun87007 »

how do i get to the config file to change it so that it knows (or doesn't care) that there are led lights installed in some of the sockets?
nmeun87007
member
Posts: 5
Joined: Mon May 07, 2012 12:49 pm

Re: Several issues (update NuCore and light error messages

Post by nmeun87007 »

i figured it out.

press f1

login:root
password:nucore

startx

right click on the led.cgf file.

change the permission to read/write

edit the file, save. reboot

thanks for all the hard work.
Post Reply