Several issues (update NuCore and light error messages
Several issues (update NuCore and light error messages
Hi,
I've had some trouble since the beginning of my NuCore installation. Now updating to 2.0 I saw them again,
and would like some advice:
1. I installed the update, and the program updated well, but next to this my loading screen picture did not change, I don't have information from the servers.txt in my NuCore settings, and I might miss more?
2. My machine keeps telling me (since NuCore is installed in the machine) that I have light (lamp) problems, the number of errors is not consistent. The lights are working fine though, really strange. (See attached pictures)
Hopefully someone can help me out on this.
Regards,
Jord Knapen
I've had some trouble since the beginning of my NuCore installation. Now updating to 2.0 I saw them again,
and would like some advice:
1. I installed the update, and the program updated well, but next to this my loading screen picture did not change, I don't have information from the servers.txt in my NuCore settings, and I might miss more?
2. My machine keeps telling me (since NuCore is installed in the machine) that I have light (lamp) problems, the number of errors is not consistent. The lights are working fine though, really strange. (See attached pictures)
Hopefully someone can help me out on this.
Regards,
Jord Knapen
- Attachments
-
- 1.JPG (164.24 KiB) Viewed 44715 times
-
- 2.JPG (249.87 KiB) Viewed 44716 times
-
- 3.JPG (204.74 KiB) Viewed 44717 times
Re: Several issues (update NuCore and light error messages
you need to do the 2.0 update twice.
The first run is to get 2.0 on your system
the second is to import the servers.txt and the new loading screen![Smile :)](./images/smilies/icon_smile.gif)
The first run is to get 2.0 on your system
the second is to import the servers.txt and the new loading screen
![Smile :)](./images/smilies/icon_smile.gif)
Re: Several issues (update NuCore and light error messages
I just read that in the installation PDF, will try it asap thanks. Any ideas on the light errors?
Re: Several issues (update NuCore and light error messages
Have you tried swapping driver boards? I think we went through this once before and the only thing you hadn't tried was the driver board.knapejor wrote:I just read that in the installation PDF, will try it asap thanks. Any ideas on the light errors?
Re: Several issues (update NuCore and light error messages
I'm not able to swap those boards as I only have one
The update worked perfectly after the second time (of course
)
![Sad :(](./images/smilies/icon_sad.gif)
![Smile :)](./images/smilies/icon_smile.gif)
Re: Several issues (update NuCore and light error messages
Chuck, as I bought the machine from someone some time ago, and I'm not sure if there might be led's in it, can it be that this causes these 'problems'?
Another question: On the first picture you can see that the date (year) is not quite right, after changing it, it resets to
the future again. Does the date come from the BIOS or OS?
Another question: On the first picture you can see that the date (year) is not quite right, after changing it, it resets to
the future again. Does the date come from the BIOS or OS?
Re: Several issues (update NuCore and light error messages
If there are LEDs in it that would definitely cause those problems. The date issue is with the pin2k source code. It doesn't hurt anything.
Re: Several issues (update NuCore and light error messages
Ok thanks again for your quick reply Chuck, I will try to alter the leds.cfg as to ignore the lights. Will keep you posted.
Re: Several issues (update NuCore and light error messages
All errors are gone now ![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
-
- member
- Posts: 1
- Joined: Wed Feb 22, 2012 4:51 am
Re: Several issues (update NuCore and light error messages
this maybe my first post, BTW loving my RFM on nucore, and have updated to 2.0 tourny mode. I installed leds earlier this week, and now have a ton of lamp errors. Does this mean that I need to manually change a config file? If so, it hardly seems worth the bother.
Cheers
Cheers
Re: Several issues (update NuCore and light error messages
Glad to hear you're loving it. To make the LED errors go away you do need to modify the config file (a feature btw.) If it doesn't bother you no biggie. It won't hurt anything.extra ball wrote:this maybe my first post, BTW loving my RFM on nucore, and have updated to 2.0 tourny mode. I installed leds earlier this week, and now have a ton of lamp errors. Does this mean that I need to manually change a config file? If so, it hardly seems worth the bother.
Cheers
-
- member
- Posts: 5
- Joined: Mon May 07, 2012 12:49 pm
Re: Several issues (update NuCore and light error messages
how do i get to the config file to change it so that it knows (or doesn't care) that there are led lights installed in some of the sockets?
-
- member
- Posts: 5
- Joined: Mon May 07, 2012 12:49 pm
Re: Several issues (update NuCore and light error messages
i figured it out.
press f1
login:root
password:nucore
startx
right click on the led.cgf file.
change the permission to read/write
edit the file, save. reboot
thanks for all the hard work.
press f1
login:root
password:nucore
startx
right click on the led.cgf file.
change the permission to read/write
edit the file, save. reboot
thanks for all the hard work.