Help with nucore hanging up

Support questions and answer and latest software.
Post Reply
wonderpuddle
member
Posts: 1
Joined: Sun May 08, 2011 11:41 pm

Help with nucore hanging up

Post by wonderpuddle »

Hello there. I was wondering if anyone could help me figure out what is up with my RFM running nucore. I warn you in advance that I am far from a computer expert, so the fix here could be ridiculously simple. Anyway, I went to turn on the machine tonight and the computer didn't want to boot. Here is a pic of where the screen held up:

Image
Untitled by light2525, on Flickr

It essentially says that keyboard and mouse weren't found and you need to press F1 to make it past this message. I did hook up a keyboard and hit F1 and was able to get the game to boot. But once I turned the machine off and back on, I ended up at this same hang-up screen.

Anyone out there have any tips on how to remedy this? My thanks in advance.
nmeun87007
member
Posts: 5
Joined: Mon May 07, 2012 12:49 pm

Re: Help with nucore hanging up

Post by nmeun87007 »

you need to go into the bios (usually by pressing f8 or del (the key on the keyboard about the up arrow)) and then there will be an option for "boot errors" in that section there should be an option for "keyboard error, mouse error, etc", you want to turn this option to "off"

it is easier to explain over the phone.

if you need me to help you send me a private message and i will give you my phone number.

Christopher
Post Reply