Nucore USB Device
-
- member
- Posts: 37
- Joined: Mon Oct 19, 2009 5:35 pm
- Location: In the arcade.
Nucore USB Device
What is it exactly that the USB device that comes in the Nucore kit do? Does anything plug into it or does it just act as a USB security key so people don't steal your software?
The box said "Requires Windows 95 or better." So I installed LINUX!
Make it idiot-proof, and someone will make a better idiot
Make it idiot-proof, and someone will make a better idiot
Re: Nucore USB Device
The answer is somewhere in the forums but I'd rather type it again than lookPinball Wizard wrote:What is it exactly that the USB device that comes in the Nucore kit do? Does anything plug into it or does it just act as a USB security key so people don't steal your software?
It really serves 3 purposes:
1) Hardware NVRAM storage. The game constantly is updating the nvram and long story short we needed to create hardware for it. This is really it's main function.
2) Expansion port. Hopefully in the near future you'll be able to plug additional hardware into the usb board's port. A hardware knocker. Shaker motor. New Bill Ung mod etc.
3) Since we needed the board for point number 1 it also acts as a security device. This was part of our contractual obligation.
-
- member
- Posts: 37
- Joined: Mon Oct 19, 2009 5:35 pm
- Location: In the arcade.
Re: Nucore USB Device
Oh, okay. I have always wondered about this thing. I don't yet own a Pin2K of any sort to have my head into one too deep but enough to know the only communication between PC and pinball was through parallel and serial ports. Thanks for the info Chuck.
The box said "Requires Windows 95 or better." So I installed LINUX!
Make it idiot-proof, and someone will make a better idiot
Make it idiot-proof, and someone will make a better idiot
Re: Nucore USB Device
Did your tests were succesfull in installing a Shaker and hardware knocker?Chuck wrote: ↑Mon Aug 02, 2010 10:55 pmThe answer is somewhere in the forums but I'd rather type it again than lookPinball Wizard wrote:What is it exactly that the USB device that comes in the Nucore kit do? Does anything plug into it or does it just act as a USB security key so people don't steal your software?
It really serves 3 purposes:
1) Hardware NVRAM storage. The game constantly is updating the nvram and long story short we needed to create hardware for it. This is really it's main function.
2) Expansion port. Hopefully in the near future you'll be able to plug additional hardware into the usb board's port. A hardware knocker. Shaker motor. New Bill Ung mod etc.
3) Since we needed the board for point number 1 it also acts as a security device. This was part of our contractual obligation.
Re: Nucore USB Device
The original Nvram/protection board did have an external interface. We honestly never had time to implement anything. Don and I have discussed possible hardware additions so the idea is not dead.