Duplicate images on RFM monitor?
Posted: Sat Dec 11, 2010 1:51 am
I should preface my post by saying I'm new to all this, and don't have a lot of experience diagnosing or working on these.
Anyway, the NuCore came in for my RFM, I installed it, and the NuCore itself works beautifully. The problem is, I have duplicate images on the screen, not an image wrap, with the divider between them (a large black line) right down the center of the screen. I attempted to adjust it using the Horiz OSC and the remote adjustment H-Posi but any slight adjustment to the right or left causes the screen to go very dark. Not only that, the image can only be adjusted so far, and it never gets to the center of the screen anyway. With that black line down the center, the screen (original) looks great - the image is clear and easy to see. If anyone has any advice or thoughts or knowledge it would be greatly appreciated. I've attached some images to illustrate what's happening (Sorry, they're big I know) - the first image shows the menu when the screen isn't adjusted, the middle image shows what happens after a slight adjustment to the left.
Incidentally, the original PC which the NuCore replaced didn't work, but the grid it displayed didn't have the duplicate image issue.
Thanks in advance!
Anyway, the NuCore came in for my RFM, I installed it, and the NuCore itself works beautifully. The problem is, I have duplicate images on the screen, not an image wrap, with the divider between them (a large black line) right down the center of the screen. I attempted to adjust it using the Horiz OSC and the remote adjustment H-Posi but any slight adjustment to the right or left causes the screen to go very dark. Not only that, the image can only be adjusted so far, and it never gets to the center of the screen anyway. With that black line down the center, the screen (original) looks great - the image is clear and easy to see. If anyone has any advice or thoughts or knowledge it would be greatly appreciated. I've attached some images to illustrate what's happening (Sorry, they're big I know) - the first image shows the menu when the screen isn't adjusted, the middle image shows what happens after a slight adjustment to the left.
Incidentally, the original PC which the NuCore replaced didn't work, but the grid it displayed didn't have the duplicate image issue.
Thanks in advance!