Launcher [4] error

[taitronics]

Hi Chuck!

I'm from Brazil and Nucore got the basics in October 2011. Follow the instructions and everything was successful. When I installed the motherboard in RFM, occurred the following error message: error launcher [4] hardware. What may be happening? Thanks, Rubens - Brazil.

[Chuck]

You forgot to download the ROMs and move them to the nucore directory. Make sure to also move the swe1 update file.

[taitronics]

You forgot to download the ROMs and move them to the nucore directory. Make sure to also move the swe1 update file.

I have downloaded the roms directory and moved to Nucore. My machine is a Revenge from Mars.

[Chuck]

I'm sorry, if it's giving a hardware error your usb board must not be attached properly.

[taitronics]

I'm sorry, if it's giving a hardware error your usb board must not be attached properly.

OK Chuck, I will check later and later reported on the forum. Thanks for helping. Rubens.

[taitronics]

I'm sorry, if it's giving a hardware error your usb board must not be attached properly.

OK Chuck, I will check later and later reported on the forum. Thanks for helping. Rubens.

Chuck, sorry, not error hardware, but LAUNCHER [4] FATAL error. Do you can help me? Thanks, Rubens.

[Chuck]

I'm sorry, if it's giving a hardware error your usb board must not be attached properly.

OK Chuck, I will check later and later reported on the forum. Thanks for helping. Rubens.

Chuck, sorry, not error hardware, but LAUNCHER [4] FATAL error. Do you can help me? Thanks, Rubens.

Unfortunately error 4 is a generic fatal error. Please post the hardware configuration you're using. You may have to go through the installation process again. Please list the hardware before you re-install.

[taitronics]

My hardware configuration:

Asus M2N-SLI Motherboard - supports AMD processors only
NVIDIA nForce 560 SLI Chipset
AMD X2 5000 Processor - 2.6 GHZ
3 GB RAM Memory DDR 2
Video Card VGA PCI Express 128 MB / 64 Bits Nvidia
IDE Samsung 80GB Hard Disk
8 x USB 2.0 / 1.1 ports
1 x Parallel port

[taitronics]

Chuck, I access the last log, and the register is:

"unable to initialize audio"
NUCORE SHUTDOWN

My motherboard have a C-Media Superior Quality Audio 7.1 channel audio CODEC

In UBUNTU OS worked properly.
But this may be the cause of the error?
If so what to do?

[Chuck]

Chuck, I access the last log, and the register is:

"unable to initialize audio"
NUCORE SHUTDOWN

My motherboard have a C-Media Superior Quality Audio 7.1 channel audio CODEC

In UBUNTU OS worked properly.
But this may be the cause of the error?
If so what to do?

If audio works in ubuntu but not Nucore it's possible the install failed somewhere. On your desktop there should be a log from the Nucore install. Check that log to make sure there were no errors.

[taitronics]

The install log has no errors, but I will restart the entire system, they may be corrupted files.
Thanks, Rubens.

[taitronics]

Hi Chuck,

I reinstalled the whole system again, no errors and the problem persists. I'm sending two log files for your information. I look forward to seeing my pinball machine work. Thank you, Rubens.

nucore_install.log:

=================================================================================
./nucore/install/install started running at Thu Nov 24 19:07:23 EST 2011
=================================================================================
Thu Nov 24 19:07:39 EST 2011 [SUCCESS] cp -r ./ /root ran without error
Thu Nov 24 19:07:39 EST 2011 [SUCCESS] rm /root/autorun ran without error
Thu Nov 24 19:07:39 EST 2011 [SUCCESS] cd /root/nucore ran without error
Thu Nov 24 19:07:39 EST 2011 [SUCCESS] cd /root/nucore/install ran without error
Thu Nov 24 19:09:00 EST 2011 [SUCCESS] apt-get -y update ran without error
Thu Nov 24 19:44:44 EST 2011 [SUCCESS] apt-get -y upgrade ran without error
Thu Nov 24 19:44:49 EST 2011 [SUCCESS] apt-get -y install libsdl-mixer1.2 ran without error
Thu Nov 24 19:44:53 EST 2011 [SUCCESS] apt-get -y install libsdl-image1.2 ran without error
Thu Nov 24 19:45:01 EST 2011 [SUCCESS] apt-get -y install libstdc++5 ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] apt-get -y install usbmount ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] cp -R ./libs/* /usr/local/lib ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] cp ./start/exec_nucore /etc/init.d/exec_nucore ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] cd /usr/local/lib ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] ln -s -f libltdl.so.3.1.4 libltdl.so.0 ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] ln -s -f libltdl.so.3.1.4 libltdl.so ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] ln -s -f libmpg123.so.O.18.12 libmpg123.so ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] ln -s -f libmpg123.so.O.18.12 libmpg123.so.0 ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] ln -s -f libSDL_mixer-1.2.so.0 libSDL_mixer.so ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] ln -s -f libSDL_mixer-1.2.so.0 libSDL_mixer-1.2.so.0 ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] ln -s -f libftchipid.so.0.1.0 libftchipid.so
ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] ln -s -f libftd2xx.so.0.4.15 libftd2xx.so ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] ldconfig ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] cd mpg123 ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] ldconfig ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] update-rc.d -f gdm remove ran without error
Thu Nov 24 19:45:07 EST 2011 [SUCCESS] update-rc.d exec_nucore start 99 2 3 4 5 . ran without error
fb0 and hpet added to menu.lst
vfat added to usbmount.conf
---------------------------------------------------------------------------------
Nucore install was a success.
Thu Nov 24 19:45:07 EST 2011 [MESSAGE] ./nucore/install/install finished runnning
---------------------------------------------------------------------------------

nucore_2011_11_25_05_43_39.log:


**************************************************************************
Nucore - 2.0 - RELEASE BUILD Copyright Big Guys Pinball LLC 2010

EMU Version: 2.0 - RELEASE BUILD
Build Type : RELEASE
Build Date : Dec 12 2010 14:03:46

Ticks Per Second = 2613238992

SDL_VIDEO: Using Software Surface
Pitch 1280 Depth 16 Width 640 Height 480
MAX CORE 1
MTPA 1
Using REAL Parallel Port @ 0x378

Auto detecting playfield.
Playfield:rfm_15
SDL_MIXER: Compiled with SDL_mixer version: 1.2.8
SDL_MIXER: Running with SDL_mixer version: 1.2.8
Unable to initialize audio:
Make sure all applications are closed.
NUCORE SHUTDOWN

[Chuck]

What version of Ubuntu did you install?

[taitronics]

What version of Ubuntu did you install?

I installed the version that came in the package, Ubuntu 8.04.

[taitronics]

Found something to solve the problem? Sorry for the anxiety, Rubens.