Page 1 of 1

More questions

Posted: Wed Jun 25, 2008 9:33 pm
by Eddie
Both the Arrow light and the Extra ball lights leading to the popper work just fine during attract mode and during the lamp tests but I hardly see the arrow lit during game play and have never seen the extra ball light lit during gameplay what does it take to light them?

I also rebuilt the flipper assemblies and used new coils and switches yet during the test mode the hold function still does not work on either, any ideas?

Re: More questions

Posted: Thu Jun 26, 2008 7:54 pm
by Chuck
You might want to try rec.games.pinball on google groups and see if there is a pinhead in your area willing to come over and lend you a hand.

Re: More questions

Posted: Thu Jun 26, 2008 9:44 pm
by Eddie
Thx for the tip but I seem to have everything worked out.

One question about Nucore... I installed the UFOpinball.com saucer LEDs mod

Will that mod be compatible with the Nucore system?

I would hate not having it anymore as it is a really nice mod. Thx

Re: More questions

Posted: Sun Jul 06, 2008 7:36 pm
by Eddie
Another Nucore Question. Will the coin and bill acceptor features remain? I never use the freeplay mode . Thx

Re: More questions

Posted: Sun Jul 06, 2008 11:02 pm
by Chuck
Yes they will. Do you make yourself pay to play? =)

Re: More questions

Posted: Tue Jul 08, 2008 8:39 pm
by Eddie
Yes I do! It gives the game the complete Pinball machine experience.

Just a follow up on my question about Nucore and the Saucer LED mod. Maybe you didnt see it.

Will it be compatible with the Nucore system?

Also I stumbled upon this page. Did you have anything to do with it?

http://www.videoengine.com/pins/rfm/default.htm

I wanted to say that you and the fellow Nucore team have my total respect for your intelligence.
Its fascinating learning what is involved and the knowledge that you and your team have in computer code and design.
Im always in awe of people such as yourselves.

Re: More questions

Posted: Wed Jul 09, 2008 4:14 pm
by Chuck
The saucer mod *should* work. We haven't tested it yet so don't quote me on that ;-)

Also, thanks for the compliment.

Re: More questions

Posted: Fri Sep 05, 2008 2:52 pm
by Eddie
Bill Ung Saucer kit Follow up.

I contacted Bill Ung and asked if his Mod will work with the Nucore system and he said that there should be no problems at all seeing that the system does NOT connect to the Motherboard only the driver board. The Mod's PC board only PLUGS into the available slot on the mother board for mounting purposes.

So we can keep our Saucer Mod when we get our Nucore system!!!!!!!!! Yea!!!!!!!!!!!!