Page 1 of 1
My Nucore Installation - Using Original Case
Posted: Wed Mar 24, 2010 4:33 pm
by applejuice
Thought i'd share some pics of my nucore project. Decided to use an original case and see if could mount everything without massive changes to the case or cutting huge holes into it. Think i've managed this ok and am well happy with the result. I'm using ribbon cables to external headers for the vga, parallel, usb connections etc pretty much like the original setup was configured. Will be using an internal header usb connection for the new usb board.
Showing the new motherboard mounting positions
- IMG_3066.jpg (65.07 KiB) Viewed 7861 times
Showing motherboard in board in final position and custom vga cable installed
- IMG_3072.jpg (168.45 KiB) Viewed 7861 times
- IMG_3071.jpg (138.2 KiB) Viewed 7861 times
Jim
http://tournament.mypinballs.com
Re: My Nucore Installation - Using Original Case
Posted: Sun Mar 28, 2010 1:41 pm
by applejuice
Had some enquiries about the specs of the computer parts i'm using so here you are:
1 x CIT Silent M-400U 400W mATX PSU
1 x Asus P5KPL-AM EPU iG31 Socket 775 onboard VGA 6 Channel Audio mATX Motherboard
1 x Intel Core 2 Duo E7500 2.93GHz Socket 775 1066FSB 3MB L2 Cache Processor
1 x Generic DDR2 667Mhz 2Gb Ram Stick
1 x 250GB Western Digital SATA 16MB Cache Hard Drive
Also have some more pics from my latest part of my installation
Showing mounted usb card
- IMG_3094.jpg (138.13 KiB) Viewed 7826 times
Showing custom parallel cable installation
- IMG_3096.jpg (108.49 KiB) Viewed 7827 times
- IMG_3097.jpg (88.03 KiB) Viewed 7828 times
Just waiting for the Ultimarc Arcade VGA 3000 card and then i'm ready to plug into my machine. Nucore software installed perfectly without any issues.
Re: My Nucore Installation - Using Original Case
Posted: Sun Mar 28, 2010 3:53 pm
by KSKID
Jim,
Thanks for posting, its much appreciated.
Re: My Nucore Installation - Using Original Case
Posted: Sun Mar 28, 2010 6:45 pm
by Chuck
Very cool. How are you planning to support the arcadevga when you install it?